SwDir.dll download

Developer:
Macromedia, Inc.
Description:
Shockwave ActiveX Control
Rating:

Since you decided to visit this page, chances are you’re either looking for swdir.dll file, or a way to fix the “swdir.dll is missing” error. Look through the information below, which explains how to resolve your issue. On this page, you can download the swdir.dll file as well.

What is SwDir.dll?

SwDir.dll a DLL (Dynamic Link Library) file, developed by Macromedia, Inc., which is referred to essential system files of the Windows OS. It usually contains a set of procedures and driver functions, which may be applied by Windows.

What is SwDir.dll used for?

SwDir.dll file, also known as Shockwave ActiveX Control, is commonly associated with Shockwave. It is an essential component, which ensures that Windows programs operate properly. Thus, if the swdir.dll file is missing, it may negatively affect the work of the associated software.

What is SwDir.dll is missing error mean?

There are multiple reasons that may cause swdir.dll errors. These include Windows registry issues, malicious software, faulty applications, etc.

Error messages related to the swdir.dll file can also indicate that the file has been incorrectly installed, corrupted or removed.

Other common swdir.dll errors include:

  • “swdir.dll is missing”
  • “swdir.dll error loading”
  • “swdir.dll crash”
  • “swdir.dll was not found”
  • “swdir.dll could not be located”
  • “swdir.dll Access Violation”
  • “The procedure entry point swdir.dll error”
  • “Cannot find swdir.dll”
  • “Cannot register swdir.dll”
swdir.dll - System Error The program can`t start because swdir.dll is missing from your computer. Try reinstalling the program to fix problem.

How to fix SwDir.dll missing error?

If the “swdir.dll is missing” error occurs, you may use one of the methods below – manual or automatic – to solve the problem. The manual method assumes that you download the swdir.dll file and put it inside the game/application installation folder, while the second method is much easier as it allows you to automatically fix the error with minimum effort.

Method 1: Download SwDir.dll

Search through available versions of swdir.dll from the list below, select the correct file and press the “Download” link. If you cannot decide which version to choose, read the article below or use the automatic method to resolve the issue

SwDir.dll, 2 available versions

Bits & Version File size Language Description Checksums
32bit 11.6.4.634 274.4 KB U.S. English Shockwave ActiveX Control
MD5
MD5 fb3aff8f1b9ef392c35dbc35f0e0d3f1
SHA1
SHA1 b212ae50d7f4d8aac1cb7f72e070e5bccdfecd50
Download
32bit 10.1.0.11 53.2 KB U.S. English Shockwave ActiveX Control
MD5
MD5 12ef836dcccdd0211f3e09d72812b9c6
SHA1
SHA1 e069663ef36a25b1ff37e023d6860164bc432730
Download

How to choose the correct version of SwDir.dll?

First, look through descriptions in the table above and select the proper file for your program. Pay attention to whether it’s a 64-, or 32-bit file, as well as the language it uses. For 64-bit programs, use 64-bit files if they are listed above.

It’s best to choose those dll files which language corresponds to the language of your program, if possible. We also recommend downloading the latest versions of dll files for an up-to-date functionality.

Where to place the SwDir.dll file?

To repair the “swdir.dll is missing” error, put the file inside the application/game installation folder. Alternatively, you can place the swdir.dll file within the Windows system directory.

How to register SwDir.dll?

If putting the missing swdir.dll file into the proper directory doesn’t solve the problem, you’ll have to register it. To do so, copy your DLL file to the C:\Windows\System32 folder, and open a command prompt with admin rights. There, type “regsvr32 swdir.dll” and press Enter.

Method 2: Fix the missing SwDir.dll error automatically

With WikiDll Fixer you can automatically repair swdir.dll errors. The utility will not only download the correct version of swdir.dll for absolutely free and suggest the right directory to install it but also resolve other issues related to the swdir.dll file.
  • Step 1: Click the “Download App. ” button to get an automatic tool, provided by WikiDll.
  • Special offer. See more information about Outbyte and unistall instrustions. Please review Outbyte EULA and Privacy Policy

  • Step 2: Install the utility by following simple installation instructions.
  • Step 3: Launch the program to fix your swdir.dll errors and other issues.

special offer

4.365.534 downloads

See more information about Outbyte and unistall instrustions. Please review Outbyte EULA and Privacy Policy

File Size: 3.04 MB, Download time: < 1 min. on DSL/ADSL/Cable

This Tool is Compatible With: windows-versions

Limitations: trial version offers an unlimited number of scans, backup, restore of your windows registry for FREE. Full version must be purchased.

Method 3: Fix SwDir.dll missing error with System File Checker (SFC)

Many users are familiar with the sfc / scannow system file integrity check command, which automatically checks and fixes protected Windows system files. To execute this command, you have to run command prompt as administrator.
  • Step 1: Start the command line as an administrator in Windows by pressing Win key on your keyboard and typing "Command Prompt" in the search field, then - right-click on the result and select Run as administrator. Alternatively, you can press Win + X key combination which will open the menu where you can select Command Prompt (Admin).
  • Step 2: Type sfc / scannow while in Command Prompt and hit Enter.

After entering the command, a system check will begin. It will take a while, so please be patient. Once operation is complete you will get the message “Windows Resource Protection found corrupt files and successfully repaired them.” or “Windows Resource Protection found corrupt files but was unable to fix some of them”.

Keep in mind that System File Checker (SFC) cannot fix integrity errors for those system files that are currently being used by operating system. To fix these files you have to run SFC command through the command prompt in the Windows recovery environment. You can get into Windows Recovery Environment from the login screen, by clicking Shutdown, then holding down the Shift key while selecting Restart.

In Windows 10, you can press Win key, select Settings > Update & security > Recovery and under Advanced Startup, click Restart now. You can also boot from the installation disk or bootable USB flash drive with the Windows 10 distribution. On the installation screen select your preferred language and then select “System Restore”. After that, go to “Troubleshooting” > “Advanced Settings” > “Command Prompt”. Once in Command Prompt type the following command: sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows where C is the partition with the installed operating system, and C: \ Windows is the path to the Windows 10 folder.

This operation will take a while and it is important to wait until it is complete. When finished, close the command prompt and restart the computer as usual.

Method 4: Fix corrupted SwDir.dll file by performing System Restore

System Restore is very useful when you want to fix swdir.dll error. Using the "System Restore" function, you can choose restore Windows to the date when the swdir.dll file was not damaged. Thus, restoring Windows to an earlier date cancels changes made to system files. Please follow the steps below to roll back Windows using System Restore and get rid of swdir.dll error.
  • Step 1: Press the Win + R keys combination to launch Run dialog.
  • Step 2: Type rstrui in the Run text box and click OK or hit Enter. It will open the system recovery utility.
  • Step 3: The “System Restore” window may include the “Choose a different restore point” option. If so, select this option and click Next. Check the “Show more restore points” checkbox to see a complete list of dates.
  • Step 4: Select a date to restore Windows 10. Keep in mind that you need to select a recovery point that will restore Windows to the date when the swdir.dll error message did not appear.
  • Step 5: Click the "Next" button and then click "Finish" to confirm your restore point.

At this point, your computer will reboot normally and boot up with restored version of Windows, and swdir.dll error should be resolved.

Method 5: Scan your PC for malware to fix swdir.dll error

Sometimes swdir.dll error can happen because of malware on your computer. The malicious software can intentionally corrupt DLL files in order to substitute them with its own malicious files. Therefore, your number one priority should be to scan your computer for malware and eliminate it as soon as possible.

OPTION 1 - Windows Defender

The new version of Windows 10 has a built-in application called "Windows Defender", which allows you to check your computer for viruses and remove malware, which is difficult to remove in a running operating system. In order to use the Windows Defender Offline scan, go to the settings (Start - Gear icon or Win + I key), select "Update and Security" and go to the "Windows Defender" section.
How to use Windows Defender Offline Scan
  • Step 1: Press Win key or click on Start and click on Gear icon. Alternatively press Win + I key combination.
  • Step 2: Select Update and Security option and go to Windows Defender section.
  • Step 3: At the bottom of the defender settings there is the checkbox " Windows Defender Offline scan". To start it, click "Scan Now". Note that you have to save all unsaved data before rebooting your PC.

After clicking “Scan Now” burton, the computer will reboot and automatically start searching viruses and malware. Upon completion of the scan, the computer will restart, and in the notifications, you will see a report on the completed scan.

OPTION 2 - Malwarebytes

Malwarebytes products are one of the most popular and effective to fight malware and unwanted programs, and they will come in handy even when you have a high-quality third-party antivirus installed. Scanning in the new version of Malwarebytes can be performed in real time and manually. To initiate manual scan please follow the steps below:
  • Step 1: Launch the Malwarebytes program and click Scan Now button. Also, you can select Scan option on the left side of the program’s window and click Full Scan. The system will begin scanning and you will be able to see the scan results.
  • Step 2: Select items that you want to quarantine and press “Quarantine Selected” button. When quarantined, you may be prompted to reboot the computer.
  • Step 3: After the program has been restarted, you can delete all quarantined objects by going to the appropriate section of the program or restore some of them if it turned out that after quarantining something from your software began to work incorrectly.

This page is available in other languages: Deutsch | Español | Français | Italiano | Português